has been working in the market of light-transparent structures since 2008. The production is focused exclusively on quality, therefore, in the production of plastic windows, only first-class German PVC profiles from REHAU and KBE are used. The main activity of Plastikus is the supply and installation of plastic windows and doors using high-quality German PVC profiles REHAU and KBE and first-class German fittings from SIEGENIA-AUBI TITAN AF. The fittings for plastic windows by SIEGENIA-AUBI are manufactured exclusively in Germany on fully automated lines eliminating the human factor. Alternatively, we can install ELEMENTIS fittings.
We also supply aluminum sliding systems for glazing balconies and loggias from the PROVEDAL profile.
So how do you properly prepare your Aubi windows for winter yourself?
First, think about what worried you last winter? What about the Aubi windows now? Do they open well? And in heavy rain, were there puddles on the windowsill? How does a window handle turn? With or without effort? As expected, the handle goes down to the end? Or not? As they say: cleanliness is a guarantee of health! In our case, regular removal of accumulated dirt and lubrication, plus the timely adjustment (adjustment) of the Aubi windows (aubi) - significantly increase the service life of the Aubi window mechanisms (aubi). The question arises: how to properly wash the Aubi window so that it does not get damaged? You can safely wash the Aubi window (aubi) with ordinary soapy water and a soft sponge. We soap the glass (double-glazed window), the Aubi window profile (aubi), the slopes, the window sill, and then wipe it dry with a soft cloth. Check the drainage channels (they are at the bottom of the window frame), maybe they need to be cleaned? It is also important to know how to adjust the Aubi windows, but more on that below.
Checking the tightness of the Aubi window (how to check where the Aubi window is blowing from?)
If in summer the problem of blowing through the Aubi (aubi) windows does not bother us much, then in winter we do not want to freeze at home. So, there are three ways how you can detect the blowing of the Aubi window (aubi). Checking the Aubi windows for blowing, looking for where the Aubi window is blowing from.
The first way to check the tightness of the Aubi window (aubi): using a sheet of paper, half A4 is enough. We open the sash and put half of the sheet on the street, close the sash, lower the handle down to the end. Important! The sheet of paper should not fall on the locks that are installed on the window frame, otherwise it will simply be bitten and the experiment will be performed incorrectly. Pull out the sheet. Three options: the sheet flies out with a whistle, the sheet comes out with difficulty, it feels like the sheet is about to break. Important! Thus, the entire perimeter of the sash is checked. If in most places of such a check the sheet comes out freely (flies out with a whistle), the seal needs to be replaced. If in most places of inspection the sheet comes out with difficulty, the problem of the tightness of the Aubi window (aubi) is solved by adjusting and lubricating the Aubi window (aubi). If in most places of the check the sheet is about to break, you do not need to do anything with the Aubi window. You will not blow Aubi out of this window!
The second way to check the tightness of the Aubi window (aubi): with soapy water. Remember how we looked for a hole in a bicycle camera?))) We make a soapy solution. Smear around the perimeter of the Aubi window. Where bubbles appear, it blows.
The third way to check the tightness of the Aubi window (aubi): with a candle flame.Pass the burning candle carefully around the perimeter of the Aubi window. Where the flame will vibrate, that's where it blows from the Aubi window.
The SIEGENIA balcony door does not close. What to do?
The SIEGENIA balcony door adjuster checks the positioning of the “answer”. The pressure pin should go into the lock striker and tightly press the balcony door leaf against the box. It often happens that the strikers are not set correctly or are absent altogether. In such cases, the master rearranges the “responses” or adds them for a tighter hold. Here we see that the pin and the strike plate of the lock are set at completely different levels. There is a distance in height between them in centimeters 8. What kind of clamping of the SIEGENIA balcony door (sigenia) can we talk about? And people lived like that, and did not assume that half of the locks on the SIEGENIA balcony door (sigenia) did not work for them !!!
Cleaning from dirt and lubrication of the Aubi window fittings (aubi)
Start insulating Aubi windows for the winter by inspecting the window fittings. Remove dirt, especially from the top of the sash. All folds must be free of deposits and dirt, especially cement and plaster residues. Direct exposure of the fittings to moisture and contact with cleaning agents should be avoided. Then lubricate the window hardware with Aubi. The lubrication points of the Aubi window are marked with a special marking. How to lubricate a plastic window Aubi? The most common is WD-40, machine oil, grease. Never grease with sunflower oil or olive oil, or anything else! Edible oils dry quickly, turning into a sticky substance that will break the window mechanism. After that, rotate the fittings in different modes several times to distribute the grease. Wipe off excess oil from the Aubi window.
Ways of adjusting the pressure of the Aubi window sash (aubi) to the frame
There are many manufacturers of window fittings and each of them has its own way of adjusting the sash pressure, but there are some general principles on how to tighten Aubi windows. Open the sash. Find the eccentric pins at the end of the sash. Most often they can be adjusted with a hex key or sprocket. Usually, there is a risk on the trunnion - a small strip. By default, it is put up - the neutral position. By twisting the pins to the left or to the right, you can strengthen or weaken the clamping of the window sash to the frame, i.e. change the winter-summer regime on your own.
SIEGENIA door lower hinge adjustment (sigienia)
The adjustment of the bottom hinge of the SIEGENIA balcony door (sigeniya) can be done in two dimensions:
• horizontal (by pressing the SIEGENIA door (sigeniya) to the hinge or pushing it aside)
• vertical (lifting the SIEGENIA door (sigeniya) up or lowering down)
For horizontal adjustment, the master opens the SIEGENIA balcony door (sigenia), then changes the position of the door relative to the hinge with a hexagon (less often with some other key).
The movement of the hinge relative to the door depends on the side of rotation of the key: it approaches, if rotated clockwise, and moves away, if rotated counterclockwise. After each action, a SIEGENIA balcony door repairman tries to open and close the door.
Then the vertical adjustment of the bottom hinge of the SIEGENIA balcony door (sigenia) is done.
Adjustment of the Aubi window sash vertically and horizontally
A window sash shift or slight bevel can be removed by horizontal adjustment. Adjustment of the position of the window sash is done using the upper and lower fixing hinges. This can usually be done with an Allen key. The adjusting screw in the lower hinge will allow the sash to be adjusted from the outside and from the inside. If you turn the key to the right, then the sash of the Aubi window (aubi) rises. If you twist to the left, then the corner of the sash is lowered. Also, the upper hinge is adjusted when the sash is open. You need to move the window sash back and forth by no more than 2 mm. If the plastic window does not close tightly from the bottom, then you need to adjust the lower hinge.If you need to press or move the window sash to (from) the lower hinge, then adjust the position of the sash when the Aubi window is open. On the lower hinge there is a second adjusting screw in order to lower and raise the sash vertically. If you turn it clockwise, the sash will rise. If counterclockwise, it will go down.
What is the adjustment (setting) of SIEGENIA balcony doors (sigenia)
The design of the SIEGENIA balcony door (sigenia) is the same as that of the window (in fact, the door is a sash, only a large one), but the dimensions and weight are much larger. This means that the load on the hinges is much higher. Due to these design features, it is recommended to adjust the SIEGENIA door (sigenia) regularly every six months, even if there are no complaints about its functioning yet.
To adjust the SIEGENIA plastic door (sigienia), remove the decorative plugs from the hinges, tighten the adjusting screws with a hexagon wrench, and the sash is given the correct position. Nothing complicated at first glance, but in reality, such work requires a lot of experience, thoroughness and even some jewelry in its implementation. Sometimes one adjustment is not enough, then the master has to rearrange or additionally install the lock strikers. The price of adjusting the SIEGENIA balcony door is quite affordable. It is better to adjust the SIEGENIA balcony door in time than not to repair it later.
Seal in / for windows Aubi (aubi)
Most popular window seals: Rehau, KBE, Shlegel Q-Lon
In most window structures, two seal perimeters are installed. The first contour of the seal is installed on the window frame - the frame seal. The second contour of the seal is placed on the window sash - the seal of the porch. In premium windows, three perimeters of the seal are installed.
What kind of window seal is there?
Tips on how to choose a window seal
Open the Aubi window. Clean the seal from visible dirt with a damp cloth. Examine it carefully. On all contours, the seal must be elastic, without visible cracks and tears, lie in the groove exactly without tubercles. Pay attention to the corners. If everything is in order, then lubricate it with silicone grease. If not, the Aubi window seal must be replaced. Otherwise, in winter it will blow from this window.
Instructions: how to replace the Aubi window seal with your own hands.
- open the sash
- remove the old window seal
- clean the groove in the frame and sash
- place the new seal in the groove in the frame and sash
To properly prepare Aubi windows for winter on your own, you do not need to unscrew the trunnions to the maximum pressure. Otherwise, the new seal will quickly deteriorate.
Adjusting the SIEGENIA balcony door handle (sigenia) or replacing it?
A tight twist of the handle indicates a problem that should be fixed right away, or it may simply break. The SIEGENIA balcony door adjuster (sigenia) will lubricate all locking mechanisms with a special agent and the balcony door handle will turn easily.
If the handle of the balcony door is broken, it can be easily replaced. To replace the window handle of a SIEGENIA balcony door (sigenia) with your own hands, you must:
• choose and buy a new SIEGENIA balcony door handle
• remove the decorative overlays of the handle by pulling slightly towards yourself and to either side
• Unscrew the opened bolts.
• remove the old handle
• install a new SIEGENIA balcony door handle (sigenia)
Difficult to choose a SIEGENIA balcony door handle? We will be happy to help you and offer a wide range of SIEGENIA balcony door handles at an affordable price. We install and replace ordinary handles with handles for plastic windows and doors with a lock, in various colors.
Sealing the seams of the Aubi window with heat-insulating materials
In the event of improper installation, sealing joints with thermal insulation materials may be the only solution. Sealing assembly seams, joints with special heat-insulating materials is one of the most effective ways to insulate Aubi windows (aubi).
What can be used to seal the street seams of an Aubi window?
- polyurethane foam, which must be plastered or covered with strips
- mineral wool, which must be covered with cover strips
- Styrofoam, which must be covered with strips
- liquid rubber (STIZom)
What can be used to seal the internal joint seams of an Aubi window?
- silicone sealant
- acrylic sealant
- kosmofenom (liquid plastic)
The described problems of Aubi windows (aubi) may appear with poor-quality installation of the window structure or with a long service life - more than 10 years. During installation, the installers had to familiarize themselves with the properties of the window structure and teach the owners to use Aubi windows.
It's late summer, early autumn - it's time to get your Aubi windows ready for winter. If you take care of insulating Aubi windows in advance, you will definitely not freeze at home in winter!
Frequently asked questions about preparing Aubi windows for winter
We have collected here the most popular questions about preparing Aubi windows for winter, we recommend that you read the answers.
Question number 1
Preparing Aubi windows for winter
How to prepare Aubi windows for winter?
Answer:
Preparation of Aubi windows for winter consists of: cleaning the Aubi windows from dirt, lubricating the fittings and seals of the Aubi windows, adjusting the Aubi windows, switching the Aubi windows to winter mode (adjusting the sash pressure Aubi windows (aubi)), replacement of the Aubi window seal (aubi), if necessary. Call and call the Aubi window repair technician in St. Petersburg (St. Petersburg) and the Leningrad Region and he will prepare your Aubi windows for winter.
Question number 2
Adjustment of Aubi windows (aubi) for winter
Do I need to adjust Aubi windows for winter?
Answer:
Hardware manufacturers recommend adjusting Aubi windows twice a year.
Question number 3
Adjustment of windows Aubi (aubi) winter-summer
Do I need to set winter-summer mode on Aubi windows?
Answer:
A normally adjusted Aubi window does not need to be switched from winter to summer. There is no winter-summer mode, this is a trick of marketers. The winter-summer mode means pressing the sash to the frame. Stronger pressure - "winter mode", weaker pressure - "summer mode".
Question number 4
How much does it cost to prepare Aubi windows for winter in St. Petersburg (St. Petersburg) and the Leningrad Region?
The cost of preparing Aubi windows for winter?
Answer:
The cost of preparing an Aubi window (aubi) for winter (adjustment and lubrication) of a window sash is 600 rubles per sash.
Question number 5
Do you give a guarantee for the work on the preparation of Aubi windows (aubi) for the winter in St. Petersburg (St. Petersburg)?
What is your guarantee for winterizing Aubi windows?
Answer:
Yes, we give a guarantee for our work. For work on the preparation of Aubi windows (aubi) for winter, a one-year warranty.
How to order the preparation of Aubi windows (aubi) for the winter in St. Petersburg (St. Petersburg) inexpensively and efficiently
Order preparation of Aubi windows (aubi) for winter in St. Petersburg (St. Petersburg) inexpensively +7 (812) 904-30-42
Calling +7(812)904-30-42, can be ordered preparation of Aubi windows (aubi) for winter inexpensively and efficiently in St. Petersburg (St. Petersburg) and the Leningrad Region. The Aubi window repair master will arrive at the specified address at a convenient time for you. Will quickly and efficiently perform all the necessary work. The experience of our experts allows us to guarantee that, with proper operation, the eliminated problems will not reappear for a long time.
We employ only highly qualified professionals who will quickly identify and eliminate the cause of the malfunction. Once again, you can enjoy the flawless performance of your Aubi windows.
Draw your attention to! We have NO specialists of "wide profile" (from ceiling to floor) and guest workers !!! Only masters are professionals in the repair of windows Aubi (aubi) !!!
Timely repair of Aubi (aubi) windows in St. Petersburg (St. Petersburg) will require significantly less money than a complete replacement. The complexity of the problem that has arisen affects the cost of repairing Aubi windows: the simpler the malfunction, the lower the price, in especially difficult cases the price of repairing Aubi windows increases.
Our advantages
- We prepare Aubi windows for the winter of any complexity.
- We repair windows Aubi (aubi) of any complexity, any manufacturer.
- Affordable rates. System of discounts, promotions.
- Urgent departure. Urgent repair of windows Aubi (aubi) in St. Petersburg (St. Petersburg) at a convenient time for you.
- Only experienced craftsmen. We don't keep crooked masters!
- High quality materials and fittings.
- Guarantee for all types of work.
There will always be someone who will make it cheaper ...
"Expensive and cute, cheap and rotten", "Free cheese is in a mousetrap" - it works here too. Good - it doesn't come cheap. The one who steals spare parts from production works cheaply, the one who pretends to be a master, the one who does not value his work. We work HONESTLY and WELL.
The choice is yours, remember that "The miser pays twice"!
Honest reviews from real customers
When it is necessary to adjust (set) the SIEGENIA balcony door (signaling)
Although the design of the SIEGENIA door looks very simple, in fact it is a complex mechanism consisting of different elements that requires careful adjustment. Adjustment (setting) of the SIEGENIA balcony door (signaling) should be carried out regularly, even if visible problems have not yet appeared. If you notice the slightest changes in the operation of the SIEGENIA balcony door (siggenia) (for example, the door starts to cling to the box or stops snuggling, the door handle starts to turn tightly), then you need to adjust (adjust) the SIEGENIA balcony door (sigenia). It is better to prevent any serious problems in a timely manner than to repair them.
When is an urgent adjustment (setting) of a SIEGENIA balcony door (sigenia) necessary?
Urgent adjustment (setting) of the SIEGENIA balcony door (sigeniya) may be needed in the following cases:
• Due to poor installation, the SIEGENIA balcony door (sigenia) does not open or close properly (with difficulty). As if it touches something, clings. Such a malfunction in the operation of the door structure is typical for new buildings. The slight, unobtrusive sagging is removed by adjusting the SIEGENIA balcony door hardware (sigenia).
• The new house or cottage began to shrink, which immediately affected the door operation. The adjustment (setting) of the SIEGENIA balcony door (sigenia) helps to avoid further deterioration and serious breakdowns that can lead to door repairs.
• From SIEGENIA doors blowing, whistling from SIEGENIA doors. For this reason, adjusting the pressure of the SIEGENIA balcony door (sigenia) is quite common. It is the fault of the broken door tightness. This often happens with balcony doors made of low quality profiles, which change their original shape due to temperature changes. It is possible to solve the problem when the SIEGENIA balcony doors whistle (sigenia) by replacing the rubber seal and performing a thorough sealing of the balcony block, both inside and outside.
• The SIEGENIA balcony door (sigenia) was damaged due to improper operation: abrupt closing / opening, mechanical shocks, etc. Timely adjustment of the SIEGENIA balcony door (sigenia) will help to solve this problem.
Price for preparing Aubi windows (aubi) for winter in St. Petersburg (St. Petersburg) and other types of services
Make your own calculation of the cost of repair and maintenance of windows and doors Aubi (aubi) in St. Petersburg (St. Petersburg)
| collapse expand | ||
| collapse expand | ||
| Adjustment of windows / doors | ||
| Adjusting the sash of a plastic window | 400 p. | sash |
| Adjusting the plastic balcony door | 600 RUB | a door |
| Adjustment of the window sash on the loggia (front glazing) | 400 p. | sash |
| Adjusting the sash of a wooden window with a double-glazed window | 400 p. | sash |
| Adjusting the plastic entrance door | 1000 p. | a door |
| Plastic entrance door closer adjustment | 700 p. | PC |
| Aligning the sash geometry (repacking) | 700 p. | sash |
| Aligning the geometry of the balcony door (repacking) | 900 p. | a door |
| Repair of windows / doors | ||
| Repair of the sash of a plastic window (bulkhead fittings) | 1000 p. | sash |
| Repair of a plastic balcony door (bulkhead fittings) | 1200 p. | a door |
| Facade glazing window sash repair (hardware bulkhead) | 1200 p. | sash |
| Repair of the sash of a wooden window with a double-glazed window (hardware bulkhead) | 1000 p. | sash |
| Repair of a plastic entrance door (bulkhead fittings) | 1500 RUB | a door |
| Replacing the window / door seal | ||
| Replacing the seal of plastic windows / doors | from 100 p. | r.m. |
| Replacing the seal of a wooden window with a double-glazed window | from 200 p. | r.m. |
| Replacing the front glazing window seal | from 200 p. | r.m. |
| Replacing the seal of plastic entrance doors | 150 p. | r.m. |
| Replacement of window / door fittings | ||
| Replacing the handle of a plastic window / balcony door | 300 p. | pen + work |
| Replacing the upper hinge of the plastic window | from 1000 rub. | hinge + work (pivoting window sash) |
| Replacing the lower hinge of the plastic window | from 1000 rub. | loop + work |
| Replacing plastic window scissors | from 2000 p. | scissors + work (swing-out sash) |
| Replacing the main locking lock (drive, gearbox) of the window | from 2500 p. | drive + work |
| Replacing the upper hinge of a plastic balcony door | from 1300 rub. | hinge + work (swing balcony door) |
| Replacing the bottom hinge of a plastic balcony door | from 1300 rub. | loop + work |
| Replacing the scissors for a plastic balcony door | from 2300 p. | scissors + work (swing-out balcony door) |
| Replacing the main locking lock (drive, reducer) of a plastic balcony door | from 3000 rub. | drive + work |
| Installation of clamps | from 450 p. | PC |
| Installation of striking plates of locks | from 300 p. | PC |
| Replacing the hinge of a plastic entrance door | from 2300 p. | PC |
| Sealing seams of windows / doors | ||
| Sealing the inner seam of windows / doors | from 200 p. | r.m. |
| Sealing the outer seam of windows / doors | from 250 p. | r.m. |
| Service maintenance of windows / doors | ||
| Winter / summer mode change | 100 p. | sash / door |
| Service maintenance of the sash of the plastic window | 600 RUB | sash |
| Service maintenance of a plastic balcony door | 800 RUB | a door |
| Service of the sash of a wooden window with a double-glazed window | 600 RUB | sash |
| Service maintenance of the sash of the facade glazing | 600 RUB | sash |
| Service of a wooden door with a glass unit | 800 RUB | a door |
| Service of the plastic entrance door | 1200 p. | a door |
| Cleaning and lubricating fittings | 200 p. | sash / door |
| Window / door opening limiters | ||
| Installing a comb on a window / door | 300 p. | comb + work |
| Installing the comb on the front window | 600 RUB | comb + work |
| Installing a handle with a key on a window / door | from 700 p. | pen + work |
| Installing a child lock on the window | from 900 p. | lock + work |
| Installing the opening limiter with a cable | 1300 RUB | lock + work |
| Installing the latch on the balcony door "smoker's kit" | 900 p. | latch + work |
| Installing the petal handle | from 100 p. | pen + work |
| Installing a double-sided handle on a balcony door | 2000 p. | pen + work |
| Finishing of plastic windows / doors | ||
| Reinstallation of drainage with foaming | from 500 p. | PC |
| Installation of drainage systems | from 1000 rub. | Work |
| Installation of window sills | from 1000 rub. | Work |
| Installation of slopes | from 300 p. | m. |
| Glass unit replacement | ||
| Replacing a single-chamber double-glazed window | 2000 p. | sq.m. |
| Replacing a double-glazed window | 2500 RUB | sq.m. |
Departure of the master and diagnostics 500 rubles.
Out-of-town visit of the master: +30 rubles / kilometer from the ring road
When accepting an order, the dispatcher will say the approximate cost of the work. The full scope of work and their exact cost are determined by the foreman on the spot.
Our contacts (mobile office)
+7(812)904-30-42
What does the master do when he adjusts the SIEGENIA balcony door?
Stages of work on adjusting the SIEGENIA balcony door (sigenia):
- adjustment of the bottom hinge of the SIEGENIA balcony door (sigenia)
- adjustment (scissors) of the upper hinge of the SIEGENIA balcony door (sigenia)
- setting the pressure (winter-summer mode) of the SIEGENIA balcony door (sigenia)
- Correction of the geometry of the SIEGENIA balcony door (sigeniya) (if necessary)
- checking the location and re-placement of the locks' striking plates (if necessary)
- test of the SIEGENIA balcony door (sigienia) for blowing
- checking the condition of the SIEGENIA balcony door seal (signaling). If necessary, replace the SIEGENIA balcony door seal (sigenia).
- lubrication of mechanisms and a seal of the balcony door SIEGENIA (sigenia)
